ATM Project Report

ATM SYSTEM

A PROJECT REPORT

Submitted for the partial fulfillment for the award of degree of BCA Computer Application of the Thiruvalluvar University.

By

K. PRIYANKA – 2878803

V. PRIYANGA – 2878802

A. SHARMILA – 2878822

Under the guidance of

Mrs. Pichaiammal, M.C.A.,

Department of Computer Application

MMES Women’s Arts & Science College

Melvisharam, Vellore – 632 509.

JAN – FEB 2011


BONAFIDE CERTIFICATE

This is to certify that this project report entitled “ATM System “ being submitted to the record, MMES Women’s Arts & Science College, Melvisharam,Vellore, by K. Priyanka, V. Priyanga and A. Sharmila for the partial fulfillment for the award of degree of BCA (Computer Application), is a bonafide record of work carried out by her, under our guidance and supervision. It has not been submitted for the award of any other degree.

HEAD OF DEPARTMENT

Department of computer Application,

MMES Women’s Arts & Science College,

Melvisharam, Vellore – 632 509.

Submitted for the Viva – Voice Examination on

INTERNAL EXAMINER                                                      EXTERNAL EXAMINER


ABSTRACT

ATM SYSTEM

The ATM System is the project which is used to access their bank accounts in order to make cash withdrawals. Whenever the user need to make cash withdraws, they can enter their PIN number (personal identification number) and it will display the amount to be withdrawn in the form of 100’s 500’s and 1000’s. Once their withdrawn was successful, the amount will be debited in their account.

The ATM System is developed in VB.Net and back-end database as Ms-Access. VB.Net is the one of the powerful version of Framework and object oriented programming. Hence we use this software in our project.

The ATM will service one customer at a time. A customer will be required to enter ATM Card number, personal identification number (PIN) – both of which will be sent to the database for validation as part of each transaction. The customer will then be able to perform one or more transactions. Also customer must be able to make a balance inquiry of any account linked to the card.

The ATM will communicate each transaction to the database and obtain verification that it was allowed by the database. In the case of a cash withdrawal, a second message will be sent after the transaction has been physically completed (cash dispensed or envelope accepted).  If the database determines that the customer’s PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed.

If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction.

The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account (“to” account for transfers).

ACKNOWLEDGEMENT

First of all, I thank the almighty god who showered his immense blessings on me, which helped me to complete this project successfully.

My heart full thanks to Prof. U. Peer, M.Sc., M.phil., D.H.Ed., P.G.D.C.A., Principal, MMES Women’s Arts & Science College for giving me the accessory environment to acquire knowledge and skill.

My sincere and warmest thanks to Mrs. Mujeebunnisa Begum, M.C.A.,  Head of the Department of Computer Application, MMES Women’s Arts & Science College, for her valuable and inspiring guidance and encouragement given throughout the period of this project.

I feel indebted to guide Mrs. Pichaiammal, M.C.A., who guide our project with reviews, evaluations, guidance and suggestions offered throughout this project.  She offered her time to perfect my work.  I appreciate her immense patience.

I am very glad to express my sincere thanks and sense of indebtedness to Mrs. Geetha, B.B.A., MD, Lee Sys Software Development & Solutions, Vellore, for permitting me to do my project work in this reputed institution.

I would also like to thank Mr. Muthu M.C.A., Project header, Lee Sys Software Development & Solutions, Vellore, who has given his valuable guidance clearing this project.

I also express my whole hearted thanks to my parents for their encouragement to bring this project to a successful completion.

1.       INTRODUCTION

1.1. Introduction to the ATM system:

Automated Teller Machine enables the clients of a bank to have access to their account without going to the bank.  This is achieved only by development the application using online concepts.

When the product is implemented, the user who uses this product will be able to see all the information and services provided by the ATM, when he enters the necessary option and arguments.  The product also provides services like request for cheques, deposit cash and other advanced requirement of the user.  The data is stored in the database and is retrieved whenever necessary.  The implementation needs ATM machine hardware to operate or similar simulated conditions can also be used to successfully use the developed product.

To develop this ATM system the entire operation has been divided into the following step:

  1. verification process
  2. language, service and account selection
  3. Banking services
  4. Transactions
  5. Special services

The program is designed in such a way that the user has to card and pin number.  Once verified, he is provided a menu and he/she had to enter the option provided in the menu.  For example, when the user wants to view the list of payment history than he/she had to enter the option for payment history provided in the main menu.  When the option is entered alone with the respective argument, then the payment history is displayed on the screen.

The user also must be given option to browse through the pages like previous page, next page, etc.  The user may experience a delay in retrieving or viewing the data, when there are many users logged on to the same bank branch system.

1.2. Need for the ATM system:

Millions of times per day around the globe people are instantly withdrawing money at automatic teller machines (ATMs).  Given the fast-pace of the world today, it is not surprising that the demand for access to quick cash is so immense.  The power of ATMs would not be possible without secure connections. The final act of ATM dispending cash is the result of an amazingly fast burst of the customer never sees, but a trust is being done in a confidential manner.


2.       SYSTEM SPECIFICATION

2.1. Hardware Requirements:

  1. Processor                     – Pentium 4
  2. RAM                           – 1 GB
  3. Hard Disk                    – 40GB
  4. Mouse                          – Standard Mouse
  5. Keyboard                     – Logitech Keyboard
  6. Processor Speed          – 2.4GHZ

2.2. Software Requirements:

  1. Operating System                     – Microsoft Windows XP With Service Pack 2
  2. Front-End                                – Microsoft Visual Studio 2005
  3. Back-End                                 – Microsoft Access 2003

2.3. Display Mode:

  1. Color Quality                            – Highest[32 bit]
  2. Screen Resolution                     – 1024 by 768 Pixels


3.       PROJECT DESCRIPTION

3.1 Need For The Software:

Now a days every one very busy in their work.  So they feel that the job must be easier so the system is used to reduce their work which is done in the ATM system.  Instead of keeping lots of paper into a record or file and it may be missed somewhere so, this system help to keep the record of the customer it also keeps the details of he customer.  It is also easy to access.

3.2 Problem description :

The system mainly used by the bank clients.  When a client comes to ATM centre to update and delete their account.  It reduces the time consumption and lot of paperwork.  For any single operation it involves numerous references and updating also takes subsequent changes in other places.


4.       SYSTEM STUDY AND ANALYSIS

4.1. Existing System:

v      The existing system is manual system.

v      The manual system is prone to error.

v      This system involves a lot of manual entries with the application to perform a desired task.

v      Usage of papers and records in the process leads to less efficiently less productivity.

v      Increase lots of mistakes while writing in paper.

v      Time delay between the user and customer is reduced.

v      For this reason the new system in invented.

4.2. Proposed System:

The system customer transactions, satisfies the requirements of the existing system in full-fledged manner.  Through this system, customer can make fast transactions and view the last transactions easily.

4.3. System Analysis:

Understand the problem before the system to create analysis model there is a tendency to rush to a solution, even before the problem is understood.

Develop prototypes that enables user to understand how human/machine interaction will occur.  Since the perception of the quality of software is often based on the perception of the “friendliness” of the interface prototyping is highly recommended.

Record the origin of and the reason for every requirement.  This is the first step-in establishing traceability back to the customer.

Use multiple views of requirements building data, functional and behavioral models provide the software engineer with three different views.  This reduces the likelihood that something will be missed and increases the likelihood that inconsistency will be recognized.

Rank requirements.  Tight deadlines may preclude the implementation of every software requirements to be delivered in the first increment must be identified.

Work to eliminate ambiguity because most requirements are described in a natural language, the opportunity for ambiguity abounds.

4.4. System planning:

v      Analysis principles are applied and a model of the software to be build called a planning (prototype) is constructed for customer and developer assessment.

v      The close-ended approach is often called throwaway prototyping using this approach a prototype serves solely as a rough demonstration of requirements it is then discarded and the software is engineered using a different paradigm.

v      An open-ended approach, called evolutionary prototyping uses the prototype as the first part of an analysis activity that will be continued into design and construction the prototype of the software is the first evolution of the finished system.

4.5. Feasibility Study:

Technology:

This system is technically feasible, because the system activated by computers and recent technology.  We use client / server technology which is powerful and very user friendly.

Finance:

It is financially feasible.  There is no need of spending over money.  Mainly this system constructed by existing devices only.  Since we use visual studio dot net as a front-end it was most power-full, small and portable across platforms and operating systems both at the source and at the binary level.  This project reduces the number of workers wage also.

Time:

This system really time-to-market beat the competition.  Because the system developed with in a time span and worked based on time event.  The time taken to access the account is very less and avoids unnecessary waiting that was in the traditional system.  Although it uses less time but its performance is very well.

Resources:

This system will use the well known resources.  Where there is no need of any special kind of resource.  It uses only the required databases, tables only.


5.       SYSTEM DESIGN

5.1 Data flow Diagram:

Level 0:

Level 1:

Level 2:

5.2 UML Design:

Use case Diagram:

A use case diagram is a diagram which consists of set of usecases and actors enclosed by system boundary, and association between usecases and actors.  Usecases diagram especially important in organizing,  modeling the behavior of the system.

Use case is a set of scenarious tied together by a common user goal.  A scenario is a sequence of steps describing the interaction between a user and system.

Usecase Diagram :

5.3. Sequence Diagram:

A sequence diagram is an easy way of describing the behavior of the system.  A sequence diagram shows an interaction arranged in time sequence.  It has two dimensions, the horizontal dimension represents the life of the object.
5.4. Collaboration Diagram:

Collaboration diagram represent a collaboration which is a set of objects related in a particular context and interaction which has asset of messages exchanges between objects.
5.5. Activity Diagram:

This diagram describes the sequence of activities with superior for conditional and parallel behavior.

5.6. Class Diagram:

It describes that set of classed, interfaces and collaboration and their relationship.  It describes the types of objects in their system and various kinds of static relationship that exceeds among them.

6.       SCREEN SHOTS

Main Form:


Menu Form:


Login Form:


Transaction Form:


Balance Inquiry Form:
Withdrawal Form:


Processing Form:
Statement Form:

Recent Transaction Details Form:
Administrator login Form:

Administrator Menu Form:

Administrator Report:
About Form:
7.         CODING

Connection Module:

Module Module1

Public conn As New ADODB.Connection

Public cmd As New ADODB.Command

Public rsUser As New ADODB.Recordset ‘Recordset for clients

Public reportstr As String

Public Account_Number As String

Public susername As String

Public Client_Name As String

Public ExpireDate As Date

Public Account_Balance As Double

Public cash As Double

Public rsTrans As New ADODB.Recordset

Public rslog As New ADODB.Recordset

Public Sub conncall()

conn = New ADODB.Connection

conn.Open(“Provider=Microsoft.Jet.OLEDB.4.0;Data Source=atm.mdb”)

If conn.State = 1 Then

If rsTrans.State = 1 Then rsTrans.Close()

rsTrans.Open(“select AccountID,TransactionDate,TransactionTime,AmountWithdrawal from trans”, conn, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)

‘Used to keep records of the transactions

If rsUser.State = 1 Then rsUser.Close()

rsUser.Open(“Select cardnumber from client”, conn, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)

‘Used for data validations and processing

If rslog.State = 1 Then rslog.Close()

rslog.Open(“Select AccIDText,PinText,UDate,UTime from log”, conn, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)

‘Used to keep track of the logins

Else

‘when database connection error occurs

MsgBox(“Database Connection Error”, vbCritical, “SD BANK PVT LTD”)

End

End If

End Sub

End Module

MDIMain form:

Public Class MDIMain

Private Sub MDIMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

Me.ATMMechineToolStripMenuItem.Enabled = False

FrmMainMenu.Show()

End Sub

Private Sub MainMenuToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MainMenuToolStripMenuItem.Click

Me.ATMMechineToolStripMenuItem.Enabled = False

FrmMainMenu.Show()

End Sub

Private Sub ExitToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ExitToolStripMenuItem.Click

FrmMainMenu.Hide()

End Sub

Private Sub ATMMechineToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ATMMechineToolStripMenuItem.Click

FrmMainMenu.Show()

End Sub

Private Sub ReportsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ReportsToolStripMenuItem.Click

FrmMainMenu.Hide()

Frmlogin.Show()

End Sub

Private Sub AboutToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AboutToolStripMenuItem.Click

‘Me.Hide()

frmAbout.Show()

End Sub

End Class

Menu form:

Public Class FrmMainMenu

Private Sub cmdATM_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdATM.Click

Me.Close()

FrmATM.Show()

End Sub

Private Sub cmdexit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdexit.Click

Me.Close()

End Sub

Private Sub FrmMainMenu_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

End Sub

Private Sub cmdReports_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdReports.Click

Me.Hide()

Frmlogin.Show()

End Sub

Private Sub cmdabout_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdabout.Click

Me.Hide()

frmAbout.Show()

End Sub

End Class

Select Transaction Form:

Public Class frmgeneral

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

Me.Close()

‘rsTrans.Close()

‘rslog.Close()

‘rsUser.Close()

FrmMainMenu.Show()

End Sub

Private Sub cmdBalance_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdBalance.Click

Me.Close()

frmAccountBalance.Show()

End Sub

Private Sub cmdWithdraw_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdWithdraw.Click

Me.Close()

frmAmount.Show()

End Sub

Private Sub cmdReport_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdReport.Click

Me.Close()

frmReport.Show()

End Sub

Private Sub frmgeneral_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

End Sub

End Class

Balance Inquiry Form:

Public Class frmAccountBalance

Private Sub frmAccountBalance_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

lblName.Text = Client_Name

lblcardNum.Text = Account_Number

lblDate.Text = ExpireDate

lblBalance.Text = Account_Balance

End Sub

Private Sub cmdclose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdclose.Click

Me.Close()

frmgeneral.Show()

End Sub

End Class

Cash Withdrawal Form:

Imports Microsoft.VisualBasic.Strings

Public Class frmAmount

Private Sub frmAmount_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated

End Sub

Private Sub frmAmount_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

End Sub

Private Sub txtRs_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtvalue.TextChanged

If Not IsNumeric(txtvalue.Text) Then

txtvalue.Text = “”

txtvalue.Focus()

End If

End Sub

Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdno.Click

Me.Close()

frmgeneral.Show()

End Sub

Private Sub cmdyes_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdyes.Click

Dim res As Integer

conncall()

‘frmgeneral.Hide()

rsUser.Close()

rsUser.Open(“Select AccountBalance,cardnumber from client where cardnumber = ‘” & Account_Number & “‘”, conn, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)

‘Print(CStr(Account_Number))

If rsUser(0).Value < Val(txtvalue.Text) Then

MsgBox(“Your Account Balance is Not enough” & vbCrLf & “Please Reenter the amount”, vbCritical, “Limit Exceeded”)

txtvalue.Text = “”

ElseIf Val(txtvalue.Text) > 25000 Then

MsgBox(“You cannot withdraw more than  $10000″ & vbCrLf & “Please enter a coorect amount again”, vbCritical, “Limit Exceeded”)

txtvalue.Text = “”

txtvalue.Focus()

ElseIf Val(txtvalue.Text) < 100 Then

MsgBox(“Invalid Amount” & vbCrLf & “You Can not withdraw amount less $ 100″, vbCritical, “Invalid Input”)

txtvalue.Text = “”

txtvalue.Focus()

ElseIf Microsoft.VisualBasic.Strings.Right(txtvalue.Text, 2) <> “00” Then

MsgBox(“Invalid Amount” & vbCrLf & “Enter amount which is divisible by 100″, vbCritical, “Invalid Input”)

txtvalue.Text = “”

txtvalue.Focus()

Else

res = MsgBox(“Are you sure ?”, MsgBoxStyle.YesNo, “Confirm Transaction”)

End If

If res = 6 Then

rsUser.Close()

rsUser.Open(“Select * from Client”, conn)

cmd.CommandText = “update client set AccountBalance = AccountBalance – ‘” & Val(txtvalue.Text) & “‘ where CardNumber= ‘” & Account_Number & “‘”

cmd.ActiveConnection = conn

cmd.Execute()

rsTrans.Close()

rsTrans.Open(“Select AccountID,TransactionDate,TransactionTime,AmountWithdrawal from trans”)

cmd.CommandText = “insert into trans(AccountID,TransactionDate,TransactionTime,AmountWithdrawal) values(‘” & Account_Number & “‘,'” & Date.Today & “‘,'” & DateTime.Now & “‘,'” & Val(txtvalue.Text) & “‘)”

cmd.ActiveConnection = conn

cmd.Execute()

cash = Val(txtvalue.Text)

txtvalue.Text = “”

Me.Hide()

Form2.Show()

ElseIf res <> vbNo Then

txtvalue.Text = “”

txtvalue.Focus()

End If

End Sub

End Class

Statement Form:

Public Class frmReceipt

Private Sub frmReceipt_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

conncall()

lblName.Text = Client_Name

lblcardNum.Text = Account_Number

lblcash.Text = cash

rsUser.Close()

rsUser.Open(“Select AccountBalance from Client where CardNumber = ‘” & Account_Number & “‘”, conn)

lblBalance.Text = rsUser(0).Value

rsUser.Close()

‘lblamount.Caption = cash

End Sub

Private Sub cmdclose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdclose.Click

Me.Close()

Client_Name = “”

Account_Number = “”

cash = 0

frmFinal.Show()

End Sub

End Class

Report Form:

Public Class frmReport

Private Sub frmReport_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

GridTitle()

FillData()

End Sub

Private Sub GridTitle()

grid.Cols = 3

With grid

.set_TextMatrix(0, 0, “Transaction Date”)

.set_TextMatrix(0, 1, “Transaction Time”)

.set_TextMatrix(0, 2, “Amount Withdrawals”)

End With

End Sub

Private Sub FillData()

conncall()

Dim i As Integer

If rsTrans.State = 1 Then rsTrans.Close()

rsTrans.Open(“select * from trans where AccountID = ‘” & Account_Number & “‘”, conn)

i = 1

If rsTrans.EOF <> True Then

While rsTrans.EOF <> True

grid.Rows = i + 1

With grid

.set_TextMatrix(i, 0, rsTrans(2).Value)

.set_ColWidth(0, 1500)

.set_TextMatrix(i, 1, rsTrans(3).Value)

.set_ColWidth(1, 2500)

.set_TextMatrix(i, 2, rsTrans(4).Value)

.set_ColWidth(2, 2500)

End With

i = i + 1

rsTrans.MoveNext()

End While

rsTrans.Close()

Else

rsTrans.Close()

grid.Clear()

GridTitle()

End If

rsUser.Close()

rslog.Close()

End Sub

Private Sub cmdclose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdclose.Click

Me.Close()

frmgeneral.Show()

End Sub

End Class

Administrator Login Form:

Public Class Frmlogin

Private Sub cmdok_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdok.Click

‘check for correct password

If txtPassword.Text = “abc123″ And LCase(txtUsername.Text) = “administrator” Then

‘place code to here to pass the

‘success to the calling sub

‘setting a global var is the easiest

‘LoginSucceeded = True

MDIMain.ReportsToolStripMenuItem.Enabled = True

Me.Close()

frmReportWindow.Show()

Else

MsgBox(“Invalid Password, try again!”, , “Login”)

txtPassword.Focus()

‘SendKeys(“{Home}+{End}”)

End If

End Sub

Private Sub Frmlogin_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

End Sub

Private Sub cmdcancel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdcancel.Click

Me.Close()

FrmMainMenu.Show()

End Sub

End Class

Report:

Public Class frmReportWindow

Private Sub cmdClose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdClose.Click

Me.Close()

FrmMainMenu.Show()

End Sub

Private Sub cmdDaily_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdDaily.Click

reportstr = “Daily”

Me.Hide()

frmview.Show()

End Sub

Private Sub cmdAll_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdAll.Click

reportstr = “All”

Me.Hide()

frmview.Show()

End Sub

Private Sub frmReportWindow_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

End Sub

End Class

Public Class frmview

Private Sub frmview_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

Dim obj As New CrystalReport1

CrystalReportViewer1.ReportSource = obj

If reportstr = “Daily” Then

CrystalReportViewer1.SelectionFormula = “{trans.TransactionDate} = #” & Trim(Date.Today) & “# “

CrystalReportViewer1.Refresh()

‘ElseIf reportstr = “Monthly” Then

‘    CrystalReportViewer1.SelectionFormula = “{trans.TransactionDate} = #” & Trim(Date.Today.Month) & “# “

‘    CrystalReportViewer1.Refresh()

ElseIf reportstr = “All” Then

‘CrystalReportViewer1.SelectionFormula = “{trans.TransactionDate} = ‘” & Trim(Date.Today.Month) & “‘ “

CrystalReportViewer1.Refresh()

End If

reportstr = “”

End Sub

End Class

8.       SOFTWARE DESCRIPTION

8.1. The Front-End

Vb.Net 2005

Visual Basic (VB) is a programming language based on the original DOS language called BASIC (Beginners’ All-purpose Symbolic Instruction Code). VB.NET 2005, an offshoot of Visual Basic, is an object-oriented programming language based on VB that is implemented using the Microsoft .NET framework. The basic syntax of the Visual Basic language remains unchanged in VB.NET 2005, but includes additional features such as structured exception handling and short circuited expressions to enhance the infrastructure of the programming language. Developers have found VB.NET to be controversial as some of the software and developmental changes clash with the original language within VB and have caused compatibility issues. Visual Studio .NET is the predominant integrated development environment (IDE) that VB.NET developers employ.

Visual Basic programmers supporting VB.NET indicate that language constructs and user interface features in the newer system have caused programming issues within the original VB system. Developers using VB.NET recognize that the upgraded VB system incorporates contemporary object oriented programming paradigms in a more stable environment than was originally thought possible.

Visual Basic .NET is a programming language that can be used to create winforms or webapp applications and create programming based in any object-oriented programming language (OOP), ADO.NET, Multithreading or Windows Services. VB.NET programming utilizes concepts connected to string encryption, forms inheritance, regular expressions and deployment.


8.2. The Backend

Ms-access:

In this project the backend is Microsoft Access.

Microsoft Access provides three methods to create database:

Create a database using a database wizard.

Create a database using a template

Create a database without using a database wizard

Queries:

We use queries to view, change, and analyze data indifferent ways.  You can also use them as a source of records for forms, reports and data access pages.  There are several types of queries in MS-ACCESS.

Types of queries in ms-access:

  1. Select Queries
  2. Parameter Queries
  3. Cross tab Queries
  4. Action Queries
  5. SQL Queries

Accessibility features in ms-access:

View and print lists of all available shortcut keys Use the keyboard to define relationships or copy text boxes or other controls on forms and reports, and rearrange columns in Datasheet view.

Create a toolbar that contains only the buttons and menus you use most often for the current database or for all your databases.  You can also increase the size of the buttons and group related buttons together. Set menus to display all commands all the time.  You can also change toolbars to appear as they did in earlier versions of Office.

Create custom colors or change the background color for a section or control on a form or report.

Insert repeated entries in a column quickly by using the keyboard. Automatically correct common typing errors and even specify a list of errors you want corrected as you type.

The MS-ACCESS is a good and easier environment for creating database and also includes reliable connectivity to this project.  Just we have to write coding for database connectivity (odbc) for our datasource is enough.

9.         TESTING

Description:

v      Software testing is a critical element of software quality assurance and represents the ultimate review of specification, design and code generation.  The increasing visibility of software as a system element and the attendant “cost” associated with a software failure are motivating force for well planned, through testing.

10. Testing:

v      Testing is the one of step in the software process that could be viewed as destructive rather than constructive.

v      Software is tested from different perspectives :

1.   White box test.

  1. Black box test

10.1 Whitebox Test:

v     White box tests focus on the program  control structure, internal program logic is exercised using this techniques.

10.2 Blackbox Test:

v     Black box testing is software requirements are exercised and derive sets of inputs conditions that will fully exercise all functional requirements for a program this testing is also called “behavioral testing”.

10.3 Level Of Testing:

The details of software functionality & test conditions are satisfied fully on behavioral based so that choose for black box testing.

10.3.1 Blackbox Testing:

v     by incorrect or missing function

  • applying block box testing in my project “ATTM SYSTEM”

v     interface errors

v     errors in external database access behavior (or) performance error

v     initialization and termination error its mainly used for uncover errors in software functions

10.3.2 Behavioral testing:

It is possible to simulate the behavior of a real time system and consequence of external events.  In this test, we check in client side if the client enter incorrect pin number for more than “three” times the applications will be closed.

10.3.3 System Testing:

Software and hardware are integrated and full range of system test is conducted so that we check for interrupt priority and the performance of each interrupt handling procedures.  In this test check on each options of banking process.


11.     USER MANUAL

The client can only login if the Server is at run.

The client can give their account number, password to login.  If their login is correct the client main menu is displayed.

The client can view the account, and they can withdrawal the required amount, view the transaction details.

These operations can also do if they enter the pin number correctly.  if they enter the pin number incorrectly the application will be closed.

The client has right to deposit the money.

12.     CONCLUSION

Future Enhancements

  • Loan Facility
  • Email and mobile alerts.
  • Active Tracing of Fraudulent activities
  • Security upgrades like Visual Sensors with burglar alarms, Biometric Identification procedures etc.

Additional Features

  • Double Layered Security
  • Secure Login.

Websites

  1. http://www.startvbdotnet.com
  2. http://www.vbdotnetheaven.com
About these ads

About leesys

this is muthu,BCA., i am a job seeker.
This entry was posted in Uncategorized. Bookmark the permalink.

One Response to ATM Project Report

  1. kumari says:

    Very good

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s